PartDesign: Serie lineare

Simmetria

Schiera polare

PartDesign

Schiera lineare
Posizione nel menu
PartDesign → Serie lineare
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Serie polare

Descrizione

Lo strumento Serie lineare crea copie equidistanti di una funzione in una direzione lineare. A partire da v0.17, è in grado di replicare più funzioni.

Sopra: un Pad a forma di L (B) creato su un pad di base (A, indicato anche come "supporto") è usato per produrre una schiera lineare. A destra viene mostrato il risultato (C).

Uso

Create

1. Optionally activate the correct Body.
2. Optionally select one or more features in the Tree view or the 3D view.
3. There are several ways to invoke the tool:
   • Press the LinearPattern button.
   • Select the Part Design → Apply a pattern → LinearPattern option from the menu.
4. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
5. If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button.
6. The LinearPattern parameters task panel opens. See Options for more information.
7. Press the OK button to finish.

Edit

1. Do one of the following:
   • Double-click the LinearPattern object in the Tree view.
   • Right-click the LinearPattern object in the Tree view and select Edit LinearPattern from the context menu.
2. The LinearPattern parameters task panel opens. See Options for more information.
3. Press the OK button to finish.

Opzioni

• Choose the mode:
  • Transform body: Transforms the whole base feature's shape (default). introduced in version 1.0
  • Transform tool shapes: Transforms the individual tool shapes of selected features.
    • To add features:
      1. Press the Add feature button.
      2. Select a feature in the Tree view or the 3D view.
      3. Repeat to add more features.
    • To remove features:
      1. Press the Remove feature button.
      2. Do one of the following:
         • Select a feature in the Tree view or the 3D view.
         • Select a feature in the list and press the Del key.
         • Right-click a feature in the list and select Remove from the context menu.
      3. Repeat to remove more features.
    • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
• Specify the Direction of the pattern:
  • Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).
  • Vertical sketch axis: The Y axis of the sketch (idem).
  • Horizontal sketch axis: The X axis of the sketch (idem).
  • Construction line #: A separate entry for each construction line in the sketch (idem).
  • Base X axis: The X axis of the Body.
  • Base Y axis: The Y axis of the Body.
  • Base Z axis: The Z axis of the Body.
  • Select reference...: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view.
• Check the Reverse direction checkbox to reverse the pattern.
• introduced in version 1.0: Specify the length Mode:
  • Overall Length: Enter the Length from a given point on the first occurrence to the same point on the last occurrence.
  • introduced in version 1.0: Offset: Enter the Offset from a given point on the first occurrence to the same point on the next occurrence. For n occurrences: OverallLength=(n-1)*Offset.
• Specify the number of Occurrences (including the original feature).
• If the Update view checkbox is checked the view will update in real time.

Limitations

See PartDesign PolarPattern.

Simmetria

Schiera polare

PartDesign

PartDesign

• Structure tools: Part, Group
• Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a shape binder, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system

---

• Modeling tools:
  • Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
  • Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, ‎Subtractive wedge
  • Boolean: Boolean operation

---

• Dress-up tools: Fillet, Chamfer, Draft, Thickness
• Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled

---

• Extras: Sprocket, Involute gear, Shaft design wizard
• Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
• Preferences: Preferences, Fine tuning

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub